Xerox 75 用户手册
Problem solving
Operator Guide
6-2
DocuTech/DocuPrint 75/90 and DocuPrint 75 MX
Solving the problems
Table 6-1. Troubleshooting tips
Problem
Symptom
Recommendation
Controller/
Printer
Printer
Power
The printer is not
receiving jobs from
the controller or will
not go on when
switched on.
receiving jobs from
the controller or will
not go on when
switched on.
•
Check to see if the cable that
connects the controller to the
printer is plugged in correctly. Each
end of the cable has a plug that is
keyed for correct fit. A plug may
have been forced inadvertently to
make a mismatched connection.
Look at the keyed patterns of the
plugs and make the connections
correctly.
connects the controller to the
printer is plugged in correctly. Each
end of the cable has a plug that is
keyed for correct fit. A plug may
have been forced inadvertently to
make a mismatched connection.
Look at the keyed patterns of the
plugs and make the connections
correctly.
Monitor
Power
The monitor screen
is black.
is black.
•
Move the mouse to recover from
the Power Saver mode.
the Power Saver mode.
•
Check to see if the LED light on
the monitor is illuminated.
the monitor is illuminated.
•
Check to see if the LED light on
the controller is illuminated.
the controller is illuminated.
•
Check to see if the power strip is
On and plugged into the wall
outlet.
On and plugged into the wall
outlet.
•
Reset the circuit breaker.
Printer
Power
The printer will not
power On.
power On.
•
Check to see if the power cord is
correctly installed.
correctly installed.
•
Press the white power switch to
the On position, and then wait 2
minutes.
the On position, and then wait 2
minutes.
•
Reset the circuit breaker.