Xerox 8510 用户指南
Supported Paper and Media
Phaser® 8510/8560MFP Multifunction Product
3-4
Paper Usage Guidelines
The system trays accommodate most sizes and types of paper, transparencies, or other
specialty media. Follow these guidelines when loading paper and media in the trays:
specialty media. Follow these guidelines when loading paper and media in the trays:
■
Use only recommended Xerox transparencies; print quality may vary with other
transparencies.
transparencies.
■
Do not print on label stock once a label has been removed from a sheet.
■
Use only paper envelopes. Print all envelopes single-sided only.
■
Do not overload the paper trays.
■
Adjust the paper guides to fit the paper size.
See also:
Duplex Automatic Document Feeder Guidelines
The document feeder accommodates original sizes from 114 x 140 mm (4.5 x 5.5 in.) to 216 x
356 mm (8.5 x 14.0 in.). The weight range includes 60-120 g/m
2
(16-32 lb. Bond) (22-45 lb.
Cover).
Follow these guidelines when loading originals into the document feeder:
■
Load originals faceup so that the top of the document enters the system first.
■
Place only loose sheets of paper in the document feeder.
■
Adjust the paper guides so that they fit against the originals.
■
Insert paper in the document feeder only when the ink on the paper is completely dry.
Note:
The document feeder is not available on the Phaser 8510MFP/N product configuration.
Document Glass
Use the document glass rather than the document feeder to copy or scan the following types of
originals:
originals:
■
Paper with paper clips or staples attached
■
Paper with wrinkles, curls, folds, tears, or notches
■
Coated or carbonless paper, transparencies, or items other than paper such as cloth or
metal
metal
■
Envelopes