Xerox 8510 用户指南

This section includes:

 

■

■

■

■

■

Transparencies can be printed from any tray. They should be printed on one side only. For best 
results, use only recommended Xerox transparencies. 

Recommended Media List (United States)
Recommended Media List (Europe)

To order paper, transparencies, or other specialty media, contact your local reseller or go to 

.

 

Damage caused by using unsupported paper, transparencies, and other specialty 

media is not covered by the Xerox warranty, service agreement, or Total Satisfaction 
Guarantee. The Total Satisfaction Guarantee is available in the United States and Canada. 
Coverage may vary outside these areas; please contact your local representative for details.

 

■

Remove all paper before loading transparencies in the tray.

■

Handle transparencies by the edges using both hands. Fingerprints or creases can cause 
poor print quality.

■

Do not load more than 50 transparencies in Tray 1. Do not load more than 
400 transparencies in Tray 2, 3, or 4. Overloading the tray can cause the system to jam.

■

Do not use transparencies with stripes on the side.

■

After loading transparencies, change the paper type at the control panel: 

Press the System button.

Select 

, and then press the OK button.

Select the appropriate tray, and then press the OK button.

Select 

, and then press the OK button.

Select paper size and type for Tray 1; select paper type for Tray 2, 3, or 4.

Press the OK button.