Xerox 7435 用户手册
Scanning and Faxing
WorkCentre 7425/7428/7435
System Administrator Guide
System Administrator Guide
142
Fax
Overview
The optional Fax feature works much the same as a standard facsimile machine. Extra features,
covered in this section, such as the Address Book, Group Dial, Comments, and the use of Folders, are
meant to provide additional capabilities in support of the Fax feature.
covered in this section, such as the Address Book, Group Dial, Comments, and the use of Folders, are
meant to provide additional capabilities in support of the Fax feature.
Note:
It is assumed that you purchased the appropriate 1 or 3 line Fax hardware kit for use with your
printer. If you did not, contact your Xerox Representative to purchase this option.
Note:
The FAX or Internet Fax (iFAX) features and the Server Fax feature are mutually exclusive. If
Server Fax is enabled, even if the printer is equipped with an internal fax board, scanning to the internal
FAX will be disabled. While the Server Fax feature is enabled, the iFAX service will also be disabled. Also
note that Folder to FAX (a Job Flow Sheet destination) and Direct Fax (LAN Fax) are not supported
when Server Fax is enabled. The default when both options have been installed is to enable the internal
fax board and Internet Fax. Server Fax will be disabled. You can use CentreWare Internet Services, to
select which Fax Service to enable. For more information see
FAX will be disabled. While the Server Fax feature is enabled, the iFAX service will also be disabled. Also
note that Folder to FAX (a Job Flow Sheet destination) and Direct Fax (LAN Fax) are not supported
when Server Fax is enabled. The default when both options have been installed is to enable the internal
fax board and Internet Fax. Server Fax will be disabled. You can use CentreWare Internet Services, to
select which Fax Service to enable. For more information see
Checking and Setting Critical Fax Parameters
Refer to the Fax Settings Topic (including Fax Defaults and Fax Control) in this section to determine if
Fax Defaults and Fax Control parameters are correctly set for your environment.
Fax Defaults and Fax Control parameters are correctly set for your environment.
Before You Start
You cannot use the printer with a call waiting service.
A facsimile located close to a main unit of a cordless phone can cause distorted images or interrupted
transmission. The printer should be installed at least five meters away from the main unit of the
cordless phone.
transmission. The printer should be installed at least five meters away from the main unit of the
cordless phone.
If the digital line leased for your company network is multiplexed, facsimile communication may be
restricted as follows:
•
restricted as follows:
•
The features using our unique transmission method, such as Recipient Print Sets, Relay Broadcast
and Remote Folder, are not available.
and Remote Folder, are not available.
•
The transmission speed is limited.
•
Super G3 cannot be used.
Communications modes
•
G3 (Auto) – Normal Fax communications: The printer automatically switches modes in the
following order of priority: Unique SG3 - Unique ECM - Unique G3 - ITU-T SG3 - ITU-T ECM - ITU-
TG3 depending on the capabilities of the remote terminal.
following order of priority: Unique SG3 - Unique ECM - Unique G3 - ITU-T SG3 - ITU-T ECM - ITU-
TG3 depending on the capabilities of the remote terminal.
•
F4800: Select this mode when transmitting over noisy or bad telephone lines, as can be the case
with overseas calls.
with overseas calls.