Xerox 7435 用户手册
Printer Management
WorkCentre 7425/7428/7435
System Administrator Guide
System Administrator Guide
174
Backing Up XSA Data and Settings and Cloning to Another Device
The Cloning feature enables you to copy/backup settings, including Xerox Standard Accounting (XSA)
settings and account information, to a file on your computer or Server. Cloning will create a .dat file
that can be used to restore the data and settings on the same machine or to clone the settings to other
machines. Both the source and target machines must have the same version of software for the .dat
file to be accepted. The software version is located on the Properties tab, under General Setup.
settings and account information, to a file on your computer or Server. Cloning will create a .dat file
that can be used to restore the data and settings on the same machine or to clone the settings to other
machines. Both the source and target machines must have the same version of software for the .dat
file to be accepted. The software version is located on the Properties tab, under General Setup.
Settings available for cloning are:
•
•
Connectivity settings
•
E-Mail settings
•
Internet Fax settings
•
Job Management settings
•
Authentication settings
•
Fax settings
•
Network Scanning Settings
•
Network Scanning Templates
•
Audit Log settings
To clone / backup a machine’s settings
1. Open your Web browser and enter the IP address of the printer in the address field. Press Enter to
open CentreWare Internet Services.
2. Click the Properties tab.
3. Click the General Setup folder, then Cloning.
4. In the Cloning area, in the Create Clone File box, select the settings that you wish to clone.
3. Click the General Setup folder, then Cloning.
4. In the Cloning area, in the Create Clone File box, select the settings that you wish to clone.
•
To see a detailed listing of the settings that will be cloned, click View Feature Details
•
To clone all features, verify that all features are checked and then click Clone.
•
To customize the configuration file, disable any of the features by clearing the check boxes
next to the feature(s), then click Clone.
next to the feature(s), then click Clone.
5. Enter the current administrator User name and password, if prompted. The default is admin and
1111.
6. Right click the .dat link that appears and select Save Target As.
7. A dialog box will prompt you to specify and name and location for the cloned file. Ensure the
7. A dialog box will prompt you to specify and name and location for the cloned file. Ensure the
extension reads .dat.
8. Click Save. The .dat file can now be used to restore the information to the same machine or to
clone other machines.