Xerox 3635MFP/S 用户手册

This section describes the basic procedure for scanning. Follow the steps 
below.

Load the Documents – page 86
Select Network Scanning – page 87
Select Network Scanning Template – page 88
Change Feature Settings – page 88
Start the Network Scanning Job – page 89
Job Status Screen – page 89
Stop the Network Scanning Job – page 90

If an authentication feature is enabled, you may need an account 

before using the device. To get an account, or for more information, contact 
the System Administrator.

You can load the documents to be scanned either on the Document Glass or 
through the Document Feeder.

The following steps explain how to load documents using the document 
feeder: 

1.

Before loading the documents into the document feeder, ensure they are 
in good condition and remove all staples and paper clips.

2.

Insert the documents neatly into 
the document feeder, face up. The 
first page should be on top with 
the headings towards the left of 
the machine.

3.

Place the stack in the middle of 
the guides aligning the left edge 
with the document feeder tray, and 
position the guides to just touch 
the edge of the documents.