Xerox 3635MFP/S 用户手册

Any changes made to the template at the machine are temporary. 

Permanent changes must be made with the same utility that created the 
template. 

Successful scanning requires selecting a template at your machine. 
Templates contain pre-selected options which will be applied to the scanned 
original, for example, information about the final destination of your job (the 
repository) and the image quality settings are defined within the template, 
along with the template name.

Refer to the System Administration CD for more information on creating 
templates.

Template names are limited to 20 characters. Template names 

containing more than 20 characters will be shortened to the first 20 
characters. Remember this when searching for existing templates or 
assigning template names.

Select a template based on where the file is required to be sent. Normally, the 
System Administrator will have established a template for use by each user. 

After a template is selected, most of the pre-programmed settings like sides 
scanned, image quality and resolution, can be temporarily changed. The 
output destination assigned to the template cannot be changed at the 
machine, but an alternate destination can be added.

Repositories are directories or filing locations set up on a server where your 
scanned files are held. Before you can use Network Scanning your System 
Administrator must set up the repositories available to your machine. The 
repositories are defined in the template and cannot be changed at the 
machine. Up to 5 repositories (1 default, 1 dedicated to the server fax and 3 
additional) can be defined.

Use this option to scan Mono, Grayscale or Full Color originals.

Use this option to scan a color original.