Xerox 3100MFP/X 用户手册

- 20 -

2 Push the lower panel down until it clicks.

3 Setup the back side tray stop by pushing the 

"PUSH" level (A).

 

Then adjust the side paper guides to the paper size 
by pushing lever (B) located on the left side guide. 
Adjust the length paper guide to the paper size by 
pushing lever (C).

4 Take a paper stack, pull the paper off and align it 

on a flat surface.

5 Put the paper stack in the tray (200 sheets of 80 g/

m² paper for instance).

6 Slide the tray back in its location.

1 Stand in front of the machine.
2 Grasp the left and right sides of the cover and pull 

it towards you at the same time.

3 Unpack the new print cartridge. Gently roll the 

cartridge 5 or 6 times to distribute the toner evenly 
inside the cartridge. Thoroughly rolling the 
cartridge will assure the maximum copies per 
cartridge.

 

Hold it by its handle.

4 Insert the cartridge in its slot by pushing it until it 

clicks, then gently push the handle down (as shown 
below). 

5 Close the cover.