Xerox 3100MFP/X 用户手册

- 27 -

1 Press  , enter 851 using the keypad.
2 Select  NORMAL or THICK with the buttons 

and  .

3 Confirm your choice by pressing the OK button.

4 Exit this menu by pressing the 

 button.

The  Automatic selection can have two meanings 
depending on the paper size defined for the paper trays. 
The following table describes the different cases.

1 Press  , enter 852 using the keypad.
2 Select the default paper tray to use, AUTOMATIC

or MANUAL, with the buttons   and  .

3 Confirm by pressing the OK button.

4 Exit this menu by pressing the 

 button.

If you want to, you can offset the lateral margins of the 
document to the left or right during the scanning from the 
automatic document feeder.

1 Press  , enter 853 using the keypad.
2 Setup the left / right margins offsets (by 0.5 mm 

steps) with the buttons   and  . 

3 Confirm by pressing the OK button. 

4 Exit this menu by pressing the 

 button.

If you want to, you can offset the lateral margins of the 
document to the left or right during the scanning from the 
document glass.

1 Press  , enter 854 using the keypad.
2 Setup the left / right margins offsets (by 0.5 mm 

steps) with the buttons   and  .

3 Confirm by pressing the OK button.

4 Exit this menu by pressing the 

 button.

If you want to, you can offset the lateral margins of the 
document to the left or right during printing.

1 Press  , enter 855 using the keypad.
2 Setup the left / right margins offsets (by 0.5 mm 

steps) with the buttons   and  .

3 Confirm by pressing the OK button.

4 Exit this menu by pressing the 

 button.

If you want to, you can offset the lateral margins of the 
document towards the top or the bottom during printing.

1 Press  , enter 856 using the keypad.
2 Setup the top / bottom margins offsets (by 0.5 mm 

steps) with the buttons   and  .

3 Confirm by pressing the OK button.

4 Exit this menu by pressing the 

 button.

This menu allows you to define the default paper size of 
the manual tray and the main tray. You can also setup the 
default scanning width.

1 Press  , enter 857 using the keypad.
2 Select the paper tray for which you want to define 

a default paper size with the buttons   and  .

3 Confirm by pressing the OK button.
4 Choose the paper size with the buttons 

 or 

according to the following table:

5 Confirm by pressing the OK button.

6 Exit this menu by pressing the 

 button.

Default tray

Tray used for copy

Selection between the 
main tray and the 
manual tray.

The manual tray is 
used.

AUTOMATIC The main tray is used.

The manual tray is 
used.

Paper tray

Available paper size

A5, Statement, A4, Legal and Letter

AUTO. TRAY A5, Statement, A4, Legal and Letter

LTR/LGL and A4