Motorola LS1203 用户手册

Symbologies 8 - 11

If you selected a Supplemental User-Programmable option from 

, select User-Programmable Supplemental 1 to set the 3-digit prefix. Then select the 3 digits using the 

numeric bar codes beginning on

Select User-Programmable Supplemental 2 to set a second 3-digit 

prefix. Then select the 3 digits using the numeric bar codes beginning on

page D-1.

With Autodiscriminate UPC/EAN/JAN Supplementals selected, this option adjusts the number of times a 
symbol without supplementals is decoded before transmission. The range is from two to thirty times. Five or above 
is recommended when decoding a mix of UPC/EAN symbols with and without supplementals, and the 
autodiscriminate option is selected. The default is set at 7.

Scan the bar code below to set a decode redundancy value. Next, scan two numeric bar codes in 

. Single digit numbers must have a leading zero. To correct an error or change a selection, 

scan Cancel on