Motorola LS1203 用户手册
2 - 2
Symbol LS1203 Product Reference Guide
Beeper Definitions
The scanner issues different beep sequences and patterns to indicate status.
defines beep sequences
that occur during both normal scanning and while programming the scanner.
Table 2-1
Beeper Definitions
Beeper Sequence
Indication
Standard Use
Low/medium/high beeps
Power up.
Short high beeps
A bar code symbol was decoded (if decode beeper is
enabled).
enabled).
4 long low beeps
A transmission error was detected in a scanned symbol. The
data is ignored. This occurs if a unit is not properly
configured. Check option setting.
data is ignored. This occurs if a unit is not properly
configured. Check option setting.
5 low beeps
Conversion or format error.
Low/high/low beeps
Advanced Data Formatting (ADF) transmit error. (For
information about ADF programming, refer to the Advanced
Data Formatting Programmer Guide, p/n 72-69680-xx.)
information about ADF programming, refer to the Advanced
Data Formatting Programmer Guide, p/n 72-69680-xx.)
High/high/high/low beeps
RS-232 receive error.
Parameter Menu Scanning
Short high beeps
Correct entry scanned or correct menu sequence performed.
Low/high beeps
Input error, incorrect bar code or “Cancel” scanned, wrong
entry, incorrect bar code programming sequence; remain in
program mode.
entry, incorrect bar code programming sequence; remain in
program mode.
High/low beeps
Keyboard parameter selected. Enter value using bar code
keypad.
keypad.
High/low/high/low beeps
Successful program exit with change in the parameter
setting.
setting.
Low/high/low/high beeps
Out of host parameter storage space. Scan
.
Code 39 Buffering
High/low beeps
New Code 39 data was entered into the buffer.
3 Beeps - long high beeps
Code 39 buffer is full.
Low/high/low beeps
The Code 39 buffer was erased or there was an attempt to
clear or transmit an empty buffer.
clear or transmit an empty buffer.
Low/high beeps
A successful transmission of buffered data.