Motorola LS1203 用户手册

4 - 6

Symbol LS1203 Product Reference Guide

Scan a bar code below to set the scan line width.

This parameter sets the maximum time that decode processing continues during a scan attempt. It is 
programmable in 0.1 second increments from 0.5 to 9.9 seconds. The default Laser On Time is 3.0 seconds.

To set a Laser On Time, scan the bar code below. Next, scan two numeric bar codes in 

 that correspond to the desired on time. Single digit numbers must have a leading zero. For example, to set 

an On Time of 0.5 seconds, scan the bar code below, then scan the “0” and “5” bar codes. If an error is made, or 
the selection needs to be changed, scan Cancel on 

This feature applies to triggered mode only.