Motorola MC9090-G 用户手册
7 - 4
MC9090-G RFID Integrator Guide Supplement
RFID reader turns itself
off.
off.
RFID reader is
inactive.
inactive.
The RFID reader turns off after a period of inactivity. If the RFID
reader is running on battery power, this period can be set to 30
sec., 1, 2, 3, 4, 5 or 6 minutes. If the RFID reader is running on
external power, this period can be set to 1, 2, 3, 5, 10, 15 and 30
minutes.
reader is running on battery power, this period can be set to 30
sec., 1, 2, 3, 4, 5 or 6 minutes. If the RFID reader is running on
external power, this period can be set to 1, 2, 3, 5, 10, 15 and 30
minutes.
For Mobile 5.0 devices, Check the power settings by tapping
Start
>
Settings
>
System
tab >
Power
icon >
Advanced
tab.
Change the setting if a longer delay is required before the
automatic shutoff feature activates.
automatic shutoff feature activates.
Battery is depleted.
Replace the battery.
Battery is not inserted
properly.
properly.
Insert the battery properly (see
).
Tapping the window
buttons or icons does
not activate the
corresponding feature.
buttons or icons does
not activate the
corresponding feature.
LCD screen not
aligned correctly.
aligned correctly.
Re-calibrate the screen.
Battery is not inserted
properly.
properly.
Insert the battery properly (see
).
A message appears
stating that the mobile
computer memory is
full.
stating that the mobile
computer memory is
full.
Too many files stored
on the RFID reader.
on the RFID reader.
Delete unused memos and records. Save these records on the
host computer.
host computer.
Too many
applications installed
on the RFID reader.
applications installed
on the RFID reader.
If additional applications have been installed on the RFID reader,
remove them to recover memory.
remove them to recover memory.
For Windows Mobile 5.0 devices, tap
Start
>
Settings
>
System
tab >
Remove Programs
icon.
For Win Mobile 5.0 devices, tap
Start
>
Settings
>
Control Panel
>
Remove Programs
icon.
Select the unused program and tap Remove.
The RFID reader does
not read a tag.
not read a tag.
Read application is
not loaded.
not loaded.
Verify that the unit is loaded with a read application. See the
System Administrator.
System Administrator.
Unreadable tag.
Ensure the tag is not defective.
Distance between the
reader and the tag is
incorrect.
reader and the tag is
incorrect.
Ensure RFID reader is within proper read range.
RFID reader is not
programmed for the
tag type.
programmed for the
tag type.
Ensure the RFID reader is programmed to accept the tag type
being read.
being read.
Battery is low.
If the reader stops reading check the battery level. When the
battery is low, the reader shuts off.
Note: If the reader is still not reading, contact the distributor or
Motorola.
battery is low, the reader shuts off.
Note: If the reader is still not reading, contact the distributor or
Motorola.
Table 7-1
Troubleshooting the RFID reader (Continued)
Problem
Cause
Solution