Motorola LS9203 用户手册
Symbologies
9-15
Decode UPC/EAN Supplementals
Supplementals are bar codes appended according to specific format conventions (e.g., UPC-A+2, UPC-E+2, EAN 13+2). The following
options are available:
options are available:
•
If you select Ignore UPC/EAN with Supplementals, and the scanner is presented with a UPC/EAN plus
supplemental symbol, the scanner decodes UPC/EAN and ignores the supplemental characters.
supplemental symbol, the scanner decodes UPC/EAN and ignores the supplemental characters.
•
If you select Decode UPC/EAN with Supplementals, the scanner only decodes UPC/EAN symbols with supplemental
characters, and ignores symbols without supplementals.
characters, and ignores symbols without supplementals.
•
If you select Autodiscriminate UPC/EAN Supplementals, the scanner decodes UPC/EAN symbols with supplemental
characters immediately. If the symbol does not have a supplemental, the scanner must decode the bar code the number of
times set via
characters immediately. If the symbol does not have a supplemental, the scanner must decode the bar code the number of
times set via
before transmitting its data to confirm that there is no
supplemental.
•
If you select one of the following Supplemental Mode options, the scanner immediately transmits EAN-13 bar codes
starting with that prefix that have supplemental characters. If the symbol does not have a supplemental, the scanner must
decode the bar code the number of times set via
starting with that prefix that have supplemental characters. If the symbol does not have a supplemental, the scanner must
decode the bar code the number of times set via
before transmitting its
data to confirm that there is no supplemental. The scanner transmits UPC/EAN bar codes that do not have that prefix
immediately.
immediately.
• Enable 378/379 Supplemental Mode
• Enable 978/979 Supplemental Mode
If you select 978/979 Supplemental Mode and are scanning Bookland EAN bar codes, see
to enable Bookland EAN, and select a format using
• Enable 977 Supplemental Mode
• Enable 414/419/434/439 Supplemental Mode
• Enable 491 Supplemental Mode
• Enable Smart Supplemental Mode - applies to EAN-13 bar codes starting with any prefix listed previously.
• Supplemental User-Programmable Type 1 - applies to EAN-13 bar codes starting with a 3-digit user-defined prefix.
Set this 3-digit prefix using Supplemental User-Programmable 1.
• Supplemental User-Programmable Type 1 and 2 - applies to EAN-13 bar codes starting with either of two 3-digit
user-defined prefixes. Set the 3-digit prefixes using Supplemental User-Programmable 1 and Supplemental User-
Programmable 2.
Programmable 2.
• Smart Supplemental Plus User-Programmable 1 - applies to EAN-13 bar codes starting with any prefix listed
previously or the user-defined prefix set using Supplemental User-Programmable 1.
• Smart Supplemental Plus User-Programmable 1 and 2 - applies to EAN-13 bar codes starting with any prefix listed
previously or one of the two user-defined prefixes set using Supplemental User-Programmable 1 and Supplemental
User-Programmable 2.
User-Programmable 2.
•
Select Supplemental User-Programmable 1 to set a 3-digit prefix. Then select the 3 digits using the numeric bar codes
beginning on page
beginning on page
•
Select Supplemental User-Programmable 2 to set a second 3-digit prefix. Then select the 3 digits using the numeric bar
codes beginning on page
codes beginning on page
To minimize the risk of invalid data transmission, select either to decode or ignore supplemental characters.
Note
Note