Motorola LS9203 用户手册

9-78

The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains. 
Lengths for D 2 of 5 may be set for any length, one or two discrete lengths, or lengths within a specific range. 

When setting lengths for different bar code types by scanning single digit numbers, single digit numbers 
must always be preceded by a leading zero.

One Discrete Length - This option allows the scanner to decode only those D 2 of 5 symbols containing a selected length. Lengths 
are selected from the numeric bar codes beginning on page 

 in 

. For example, to decode only D 2 

of 5 symbols with 14 characters, scan D 2 of 5 - One Discrete Length, then scan 1 followed by 4. If an error is made or to change 
a selection, scan Cancel on page 

.

Two Discrete Lengths - This option allows the scanner to decode only those D 2 of 5 symbols containing either of two 
selected lengths. Lengths are selected from the numeric bar codes beginning on page 

example, to decode only those D 2 of 5 symbols containing either 2 or 14 characters, select D 2 of 5 - Two Discrete Lengths, 
then scan 0, 2, 1, and then 4. If an error is made or to change a selection, scan Cancel on page 

Note