Motorola LS9203 用户手册

4-10

This parameter sets the maximum time that decode processing continues during a scan attempt. It is programmable in 0.1 second 
increments from 0.5 to 10 seconds. The default Laser On Time is 3.0 seconds.

To set a Laser On Time, scan the bar code below. Next, scan two numeric bar codes beginning on page 

 in 

 that correspond to 

the desired on time. Single digit numbers must have a leading zero. For example, to set an On Time of 0.5 seconds, scan the bar code 
below, then scan the “0” and “5” bar codes. If an error is made, or to change a selection, scan Cancel on page 

.