Brother 9200C 业主指南

P R I N T E R   D R I V E R   S E T T I N G S      

Select the print quality. The print quality and speed are related. Higher quality 
takes a longer time to print.

Select the media (type of paper). The MFC changes the way it places dots 
depending on the selected media type. To get the best print output, make sure to 
select the correct media type.

Selecting media type changes the print quality selection to the most suitable one 
as listed below. We recommend that you print with the preset quality for best 
printing result.

300 x 150 dpi. The fastest print mode (approximately two to 
four times faster than normal mode) and gives lower ink 
consumption. Use this mode to print large volume documents 
or a document for proofing.

300 x 300 dpi. Recommended mode for ordinary printouts. 
Good print quality with typical print speed.

600 x 600 dpi. Better print quality than Normal and faster print 
speed than Super Fine.

1200 x 1200 dpi. Use this mode to print precise images such 
as photographs. Since the print data is much larger than 
Normal mode, processing time, data transfer time, and 
printing time will be longer.

Plain Paper

Normal

Ink Jet Paper (Coated Paper)

Fine

Glossy Paper

Super Fine

Transparency

Normal

Transparency (mirror)

Normal

Use only genuine Brother Coated Paper (Ink Jet), Glossy Paper, or 
Transparencies to get the best print quality. Non-Brother special paper may not 
produce the best quality.