Brother 9200C 业主指南

A S S E M B L Y   A N D   C O N N E C T I O N S      

Check that you turned on the power (by 
plugging in the power cord) and that the 
paper cassette is loaded with paper and 
installed in the MFC. The LCD 
alternately shows;

Close the document cover before you open the Scanner Cover.

Press the blue Scanner 
Cover Release Button on 
the right side of the MFC 
and lift the scanner cover. 
After a few seconds, the 
print head will move left to 
its replacement position. 

Remove the yellow 
shipping cover by pulling 
it toward you and lifting it 
up and out.

■

The bottom of the yellow 
shipping cover is wet with 
ink that will cause stains, so 
wipe it clean before you 
place it down. Keep the 
yellow shipping cover in a 
safe place.

We recommend that you install the ink cartridges from left to right in this order: 
Black, Yellow, Cyan, Magenta.

Open the Black ink cartridge bag and remove the ink cartridge.

Carefully remove the sealing tape from the bottom of the ink cartridge.  Be sure 
to peel the tape in the direction away from you.

S E T   C A R T R I D G E S

P L S   O P E N   C O V E R

2

1