Brother 9200C 业主指南

      A S S E M B L Y   A N D   C O N N E C T I O N S

Most offices use a central telephone system. While it is often relatively simple 
to connect the machine to a key system or a PBX (Private Branch Exchange), 
we suggest that you contact the company that installed your telephone system 
and ask them to connect the MFC for you. It is advisable to have a separate line 
for the MFC. You can then leave the MFC in FAX mode to receive faxes any 
time of day or night.

If the MFC is to be connected to a multi-line system, ask your installer to 
connect the unit to the last line on the system. This prevents the unit from being 
activated each time a telephone call is received.

It is not guaranteed that the unit will operate correctly under all circumstances 
with a PBX. Any cases of difficulty should be reported first to the company that 
handles your PBX.

If all incoming calls will be answered by a switchboard operator, it is 
recommended that the Receive Mode be set to MANUAL. All incoming calls 
should initially be regarded as telephone calls.

The MFC may be used with either pulse or tone dialing telephone service 
(For Canada only).

To learn how custom features may affect your faxing operations, see Chapter 23, 
Troubleshooting and Routine Maintenance.

As with all fax units, this machine must be connected to a two wire system. If 
your line has more than two wires, proper connection of the MFC cannot be 
made.