Canon 2830 用户手册

Setting Up Memory Boxes

Customizin

g F

a

x Se

tting

s

NOTE

 

•

If you make a mistake when entering the subaddress/password, press 

 (Clear) 

➞ 

enter the correct subaddress and password.

•

If you want to cancel storing the subaddress/password, press [Cancel].

 

A Relay Memory Box enables you to forward received documents to a number of 
specified destinations at a specified time, using the machine as a relay unit.

You can set the Relay Start Time, and relay all of the documents stored in the 
memory box at the same time. (See "Memory Boxes," on p. 3-5.)

You can specify the following items for the Relay Memory Box.

*1 

Indicates the default setting.

Memory Box Name

Sets the memory box name.

Relay

*1

24 characters 

maximum

Password

Sets a password to control the memory box. 

It is necessary to enter the password to 

change the contents of the memory box, or to 
print documents received in the memory box.

Not required

A one to seven digit 

number

Subaddress

Sets an ITU-T standard subaddress. A 

subaddress is required to distinguish a Relay 

Memory Box from other memory boxes.

Required

Numbers, #, *, and 

spaces can be used 

(up to 20 digits).

RX Password

Sets an ITU-T standard password. If a 

password has been set, the password added 

to the received documents is compared with 

the set password. If the passwords do not 

match, the documents are not received.

Not required

Numbers, #, *, and 

spaces can be used 

(up to 20 digits).

Relay Sending 

Destination

Sets the destination to which the received 

documents in the memory box are sent.

Specify the 

destination using the 

Address Book or 

Coded Speed Dialing.