Canon 3035 用户手册

MEAP Settings

System Manager Settings

● If you select [On]:

❑

Select [On] or [Off] for <Use SSL> 

➞ press [OK]. 

Use SSL (Secure Sockets Layer)

● If you select [Off]:

❑

Press [OK].

NOTE

 

•

Before setting <Use SSL> to 'On', it is necessary to set a default key in Network 
Settings (from the Additional Functions screen). (See Chapter 3, "Using a TCP/IP 
Network," in the Network Guide.)

•

The Use HTTP mode is enabled only after you restart the machine (the main power 
switch is turned OFF, and then back ON). For instruction on restarting (turning the 
main power switch OFF and then ON) the machine, see "Main Power and Control 
Panel Power, " on p. 1-15.

•

Any changes made to <Use SSL> are also applied to <Use SSL> in Remote UI in 
System Settings (from the Additional Functions screen).

 

You can print the MEAP application information, as well as certain system 
application information.

NOTE

 

The information is printed as a report.

➞ [System Settings] ➞ [MEAP 

➞ [Print System Information].

[On]:

SSL is used to communicate.

[Off]:

SSL is not used to communicate.