Pandigital PRD06E20WWH8 用户手册

Set Up Wi-Fi Network

Since many features require a Wi-Fi connection, we recommend you set up your
Wi-Fi network now.

1. Select

Settings

from the Application Quick Launch Bar,



tap

Network

2. Turn Wi-Fi on by tapping the

Wi-Fi is off/Turn on Wi-Fi

3. The device automatically scans and list all local Wi-Fi Networks found. A

indicates secure networks that require login name/password to connect.

4. Tap the desired network to which you want to connect,



enter the

Network

Password

if applicable.

5. Tap

to close the

Settings

screen.



If your Wi-Fi network is set as hidden, it won’t be found by the auto scan. Tap

Other

and then enter the network name and key,



tap

Save



(Advanced): After saving the Wi-Fi network, you can change your network
settings by selecting

Manual Setup

, and then follow the prompts.



The Wi-Fi icon on the top of screens indicates the status as follows:

= Connected

= Not connected, Wi-Fi turned ON

= Not connected and Wi-Fi turned OFF (power saver)



When the device goes into sleep mode, the Wi-Fi disconnects from the
local network, but will automatically reconnect when out of sleep mode
(may take up to 30 seconds to reconnect).

Connecting to Public Wi-Fi Hotspot

If you are connecting via a public Wi-Fi hotspot, it may be necessary to
immediately launch the browser and provide the hotspot login information prior to
having an active internet connection.

1. Follow steps 1-5 above to select the hotspot Wi-Fi network.

2. Select

Web

from the Application Quick Launch Bar.

3. Enter the login information as required by the hotspot.

Reset Device

If the Android Operating system hangs, you can simply reset the device by inserting a
paper clip into the reset hole at the top of the device.