Jabra 300 用户手册
Setting the billing-code configuration
HP MFP Send Fax supports the use of billing codes when sending faxes.
To enable or disable the billing-code feature on the HP LaserJet 4345mfp and 9040/9050mfp and the
HP Color LaserJet 4730mfp and 9500mfp through the MFP control panel after the MFP Send Fax driver
has been installed, use the following steps:
HP Color LaserJet 4730mfp and 9500mfp through the MFP control panel after the MFP Send Fax driver
has been installed, use the following steps:
1.
On the MFP control panel, press
Menu
.
2.
Scroll to and touch
FAX
.
3.
Scroll to and touch
FAX SEND
.
4.
Scroll to and touch
BILLING CODE
.
5.
Touch
CUSTOM
to open the billing-code screen.
6.
Use the up and down arrows to select the minimum number of digits in the billing code.
7.
Touch
OK
to enable the billing-code feature or touch
OFF
to disable the billing-code feature.
NOTE:
If the billing-code feature is enabled on the MFP, a billing-code entry is required for walk-
up fax jobs that you send from the MFP.
To enable or disable the billing-code feature on the HP LaserJet M3035MFP, M3027MFP, M4345MFP,
M5025MFP, M5035 MFP, and HP Color LaserJet CM4730 MFP and CM6040 MFP through the MFP
control panel after the MFP Send Fax driver has been installed, use the following steps:
M5025MFP, M5035 MFP, and HP Color LaserJet CM4730 MFP and CM6040 MFP through the MFP
control panel after the MFP Send Fax driver has been installed, use the following steps:
1.
On the MFP control panel, touch
Administration
.
2.
Scroll to and touch
Initial Setup
.
3.
Scroll to and touch
Fax Setup
.
4.
Scroll to and touch
Fax Send Settings
.
5.
Scroll to and touch
Billing Codes
.
6.
Touch
Custom
to open the billing-code screen.
7.
Use the up and down arrows to select the minimum number of digits in the billing code.
8.
Touch
OK
to enable the billing-code feature or touch
Off
to disable the billing-code feature.
NOTE:
If the billing-code feature is enabled on the MFP, a billing-code entry is required for walk-
up fax jobs sent from the MFP.
68
Chapter 3 Configuration
ENWW