Konica Minolta C652DS 用户手册
Windows Vista/Server 2008
4
4-4
bizhub C652/C652DS/C552/C452
4.1
5
Click "Add a network, wireless or Bluetooth printer".
Connected printers are detected.
% If no printer is detected, turn your printer off then on again.
In this case, turn off the printer, and then wait approximately 10 seconds before turning it on again.
If you turn the printer on immediately after turning it off, it may not function correctly.
If you turn the printer on immediately after turning it off, it may not function correctly.
6
Select your machine from the list, and then click [Next].
% To use the LPR/Port 9100 protocol, select the printer with its IP address.
% To use the SMB connection, select the printer with its "\\NetBIOS name\print service name".
% For the SMB connection, click [Next], and then click [OK] in the "Connect to Printer" page that
appears.
% It may take some time to finish searching the entire list of printers.
7
Click [Have Disk].
8
Click [Browse].
9
Select a desired printer driver folder in the DVD-ROM, and then click [Open].
% Select a folder according to the printer driver, operating system, and language to be used.
Selectable printer drivers:
PCL driver, PS driver, XPS driver and fax driver
PCL driver, PS driver, XPS driver and fax driver
10
Click [OK].
The "Printers" list appears.
11
Click [Next].
% To use the SMB connection, click [OK].
12
Follow the instructions on the pages that follow.
% If the "User Account Control" window appears, click [Continue].
% If the "Windows Security" window for verifying the publisher appears, click "Install this driver
software anyway".
13
Click [Finish].
14
After finishing the installation, make sure that the icon for the installed printer is displayed in the
"Printers" window.
"Printers" window.
15
Remove the DVD-ROM from the DVD-ROM drive.
This completes the printer driver installation.
Installing the printer driver by creating a printer port
0
Installing the driver to Windows Vista/Server 2008-based computers requires the administrator
authority.
authority.
0
Since the printer is searched for during the installation, be sure to connect the machine to the network
before turning it on.
before turning it on.
1
Insert the printer driver DVD-ROM into the DVD-ROM drive of the computer.
2
Press the [Start] key, and then select "Control Panel".
3
Click "Printer" under "Hardware and Sound".
The "Printers" window appears.
% When "Control Panel" is displayed in Classic View, double-click "Printer".
4
Click [Add a printer] on the toolbar.
"Add Printer Wizard" starts.