Konica Minolta C652DS 用户手册

bizhub C652/C652DS/C552/C452

4-23

To use LPR printing, specify the port while installing the printer driver.

To use LPR printing, you must configure the network settings for the machine in advance.

d

For details on the network settings for the machine, refer to the "User's Guide [Network Administrator]".

0

Installing the driver to Windows NT 4.0-based computers requires the administrator authority.

0

In Windows NT 4.0, to use the LPR port, you must have the Microsoft TCP/IP Printing service installed 
in your computer.

Insert the printer driver DVD-ROM into the DVD-ROM drive of the computer.

Press the [Start] key, and then select "Settings" - "Printers".

Double-click the "Add Printer" icon.

"Add Printer Wizard" starts.

On the window for specifying how the printer is attached, select "This computer".

Click [Next].

A page for selecting a port appears.

Click [Add Port].

From the "Available Printer Ports" list, select "LPR Port", and then click [New Port].

Enter the IP address of the machine in the "Address" box, enter "Print" in the "Queue Name" box, and 
then click [OK].

% You must discriminate between upper and lower case letters when entering it.

Select the created port, and then click [Next].

Click [Have Disk].

Click [Browse].

Select a desired printer driver folder in the DVD-ROM, and then click [Open].

% Select a folder according to the printer driver, operating system, and language to be used. 

Selectable printer drivers: PCL driver and fax driver

Click [OK].

The "Printers" list appears.

Click [Next].

IP address

In "TCP/IP Setting" of the machine, specify the IP address.

LPD Setting

To use LPR printing:
 In "LPD Setting" for the machine, enable LPD printing.