Konica Minolta C652DS 用户手册

5-12

bizhub C652/C652DS/C552/C452

After being connected, this machine can be used as a printer by selecting a PostScript printer and specifying 
the"printer description (PPD) file".

First, copy the "printer description (PPD) file" to the computer.

Insert the printer driver DVD-ROM into the DVD-ROM drive of the computer.

Open the folder in the DVD-ROM that contains the desired printer driver.

% Select a folder according to the printer driver, operating system, and language to be used.

Select the PPD file "KONICAMINOLTAC652UVxxx.ppd", and then copy it into "Printer Description 
folder" that can be accessed by selecting "Macintosh HD" - "System Folder" - "Extensions".

This completes the printer driver installation.

In OS 9, the printer can be connected using AppleTalk or LPR (LPD).

Configure the network settings for the machine, and then select the printer.

Configuring the AppleTalk settings for the machine

Enable AppleTalk in "AppleTalk Setting", and then enter the printer name.

d

For details on the AppleTalk settings for the machine, refer to the "User's Guide [Network Administrator]".

Configuring the AppleTalk settings for the computer

Configure the AppleTalk settings for the Macintosh computer connected to the printer.

In the "Apple" menu, select "Control Panel" - "AppleTalk".

From "Connect via", select "Ethernet".

Click the close button at the top left corner of the window.

% When the "Save changes to the current configuration?" message appears, click [Save].

Selecting a printer

In the "Apple" menu, select "Chooser".

Make sure that "AppleTalk" is set to "Active", and then click the "LaserWriter" icon.

From the "Select a PostScript Printer" list, click the desired model name, and then click [Create].

The window for selecting a PostScript printer description (PPD) file appears.

% If a different PPD file has already been selected, click [Setup] in Step 3, and then click [Select PPD] 

from the window that is already displayed.

Click the applicable PPD file, and then click [Select] (or [Open]).

When the selected printer is registered in the "Chooser", the setting procedure is completed.

% If the window showing the installable options appears, proceed to change the option settings as 

necessary. Go to Step 5.

% If the "Chooser" window appears, go to Step 7.

Specify the options installed in the machine in the "Options Installed 1" and "Options Installed 2" 
windows.