Uniden DSS 2455 用户手册

If your phone is not performing to your expectations, please try these simple steps first.

The charge LED won’t illuminate  • Make sure the AC adapter is plugged into the base (or the charger 
when the handset is placed in 

(for DSS2465 only)) and wall outlet.

the cradle.

• Make sure the handset is properly seated in the cradle.
• Make sure the charging contacts on the handset and the base 

(or the charger (for DSS2465 only)) are clean.

The audio sounds weak

• Move the handset and/or base to a different location away from metal 

and/or scratchy.

objects or appliances and try again.

• Make sure that you are not too far from the base.

Can’t make or receive calls.

• Check both ends of the base telephone line cord.
• Make sure the AC adapter is plugged into the base and wall outlet.
• Disconnect the AC adapter for a few minutes, then reconnect it.
• Remove the base ID (see “Deregister the Base Setting” on page 22) and

register the handset to the base (see “Register the Handset” on page 56).

• Make sure that you are not too far from the base.
• If an outside call is already established, you may not be able to make another 

outside call.

Can’t make an internal call.

• Make sure that the receiving handset is not already in use.
• Make sure that the handset or the base is in the standby mode.
• When a handset is recording a conversation, an intercom call from or to the 

base is not available. Make sure a handset is not recording a conversation.

UP308BH (DSS2465) ENG OM  8/6/03  10:37 AM  Page 63