OKI MC160n 用户手册
56
Sending Faxes
4
Specify the fax number of the recipient by using the telephone to dial the fax
number.
number.
"
The fax number of the recipient can also specified using the keypad in the
control panel of this machine.
control panel of this machine.
"
If Pulse is selected as the telephone line type, press the key to tempo-
rarily change the line type to Tone.
rarily change the line type to Tone.
5
After finishing talking on the phone, the recipient should press the necessary
key to start receiving the fax.
Once the recipient’s fax machine is ready, a beep is sounded.
key to start receiving the fax.
Once the recipient’s fax machine is ready, a beep is sounded.
6
Press the Start key to begin scanning and sending the fax.
7
Replace the handset to its cradle.
"
To stop the transmission, press the Stop/Reset key. A message appears,
requesting confirmation to cancel the setting. Select YES, and then press
theEnter key.
requesting confirmation to cancel the setting. Select YES, and then press
theEnter key.
Sending a Fax Manually Using the O
N
H
OOK
Key
"
Manual transmission cannot be used together with duplex (double-sided)
document transmission.
document transmission.
1
Load the document into the ADF.
"
When sending a fax manually, load the document into the ADF. An error
will occur if the document is placed on the original glass.
will occur if the document is placed on the original glass.
"
For details on loading the document into the ADF, refer to “Sending a Fax
Using the ADF” on page 40.
Using the ADF” on page 40.
2
If desired, adjust the image quality.
"
The document image quality can be adjusted. For details, refer to “Adjust-
ing the Image Quality” on page 44.
ing the Image Quality” on page 44.
3
Press the On hook key.
4
Specify the fax number of the recipient.
"
The keys for registered destinations can be used even if the On hook key
has been pressed. For details, refer to “Specifying a Recipient” on
page 45. (Group dial destinations cannot be specified.)
has been pressed. For details, refer to “Specifying a Recipient” on
page 45. (Group dial destinations cannot be specified.)
"
If Pulse is selected as the telephone line type, press the key to tempo-
rarily change the line type to Tone.
rarily change the line type to Tone.