Viewsonic VG191 用户手册
ViewSonic
VG191/VG191b
9
Do the following to adjust the screen image:
1
To display the Main Menu, press button [1].
2
To highlight a control you want to adjust, press
▲
or
▼
to scroll up or down
the Main Menu.
3
To select the highlighted control, press button [2]. A control screen appears
like the one shown below for the selected control.
like the one shown below for the selected control.
4
To adjust the selected control, press the up
▲
or down
▼
buttons on the Front
Control Panel of the monitor.
5
To save the adjustments and exit the menu, press button [1] twice.
The following tips may help you optimize your display:
• Adjust your computer's graphic card so that it outputs a video signal 1280 x
1024 @ 60Hz to the VG191/VG191b. (Look for instructions on “changing
the refresh rate” in your graphic card's user guide.)
the refresh rate” in your graphic card's user guide.)
• If necessary, make small adjustments using H POSITION and V POSITION
until the screen image is completely visible. (The black border around the
edge of the screen should barely touch the illuminated “active area” of the
ViewPanel
edge of the screen should barely touch the illuminated “active area” of the
ViewPanel
®
.)
• Adjust FINE TUNE so that the screen image looks focused, crisp, and sharp.
NOTE:
Auto Image Adjust and Manual Image adjust are inactive for digital mode.
NOTE:
All OnView menus and adjustment screens disappear automatically
after about 15 seconds. This time period is adjustable through the Setup menu
and the OSD timeout control described on page 13.
and the OSD timeout control described on page 13.