Viewsonic VS13777 用户手册
15
Control
Explanation
Dynamic Contrast allows the user to turn the contrast ratio enhancement on or
off.
NOTE: This function cannot be adjusted in 3D mode.
Response Time adjusts the response time of liquid-crystal display for image
quality enhancement.
Standard sets response time to normal speed.
Advanced sets response time to higher speed.
Ultra Fast sets response time to highest speed.
NOTE: This function cannot be adjusted in 3D mode.
Advanced sets response time to higher speed.
Ultra Fast sets response time to highest speed.
NOTE: This function cannot be adjusted in 3D mode.
Aspect ratio Selects the image size for 4:3 and full screen.
NOTE: This function cannot be adjusted in 3D mode.
NOTE: This function cannot be adjusted in 3D mode.
Overscan allows the user to cut off extra area around the image.
NOTE: This function cannot be adjusted in 3D mode.
NOTE: This function cannot be adjusted in 3D mode.
ECO Mode provides the lower power consumption by reducing the brightness.
Standard: The default brightness setting.
Optimize: Decreases the brightness by 25 %.
Standard: The default brightness setting.
Optimize: Decreases the brightness by 25 %.
Conserve: Decreases the brightness by 50 %.
3D Emitter Mode determines the way the emitter sends out IR pulses by
Normal, Consumer IR mode and
Normal, Consumer IR mode and
LAN party mode
.
Normal: continuous transmission of IR pulses at high intensity. This results in
the largest range/distance and optimal glasses timing. However, because the IR
transmission is continuous, it can prevent other IR remote control devices to
work.
Consumer IR mode: in this mode, the emitter will transmit only 2 times per
second. This way, IR remote control devices have enough time to send their
own control codes when the emitter is idle.
LAN party mode: in this mode, the IR transmission is continuous, but at
reduced intensity. This is useful for situations where a number of 3D vision
monitors are enabled at the same time. But reducing the intensity, the range of
the IR light will be less, which reduces the chance that neighboring monitors
will interfere with each other.
the largest range/distance and optimal glasses timing. However, because the IR
transmission is continuous, it can prevent other IR remote control devices to
work.
Consumer IR mode: in this mode, the emitter will transmit only 2 times per
second. This way, IR remote control devices have enough time to send their
own control codes when the emitter is idle.
LAN party mode: in this mode, the IR transmission is continuous, but at
reduced intensity. This is useful for situations where a number of 3D vision
monitors are enabled at the same time. But reducing the intensity, the range of
the IR light will be less, which reduces the chance that neighboring monitors
will interfere with each other.