Viewera V171HT 用户手册



Power and extension cords

♦

Do not allow anything to rest on the power cord.

♦ Do not locate this product where persons will walk on the cord.

♦ Use the proper power cord with correct attachment plug type. If the

power source is 120V AC, use a power cord that has UL and C-UL

approvals. If the power source is a 240V AC supply, use the tandem (T

blade) type attachment plug with ground conductor power cord that

meets the respective European country’

s safety regulations, such as VDE

for Germany.

♦

Do not over load wall outlets or power cords. Ensure that the total of all

units plugged into the wall outlet does not exceed 10 amperes.

♦

Ensure that the total ampere ratings on all units plugged into the extension

cord is not above the cord’

s rating.

♦

If the power supply cord, which came with your monitor, is to be

connected to the PC instead of the wall outlet, Use an UL/TUV approved

computers with receptacle rated 100~240V AC, 50/60Hz, 1.0A(minimum)

only.



Environment

♦ Place the monitor on a flat and leveled surface.
♦ Place the monitor in a will-Ventilated place.
♦ Keep the monitor away from：

Overly hot, cold or humid places, places directly under sunlight,

dusty surroundings, equipment that generate strong magnetic fields.

♦ Please adjust the frequency to 75 Hz after setting up the LCD monitor.

♦ Then push the OSD menu button and use the Auto Adjust function to find

the best mode of your computer.

Page 4

2. Control Functions

a.【PC,Audio,DVI】

Control Button Front View

﹝2﹞ ﹝5﹞ ﹝1﹞ ﹝3﹞ ﹝4﹞

1. Power Switch

Turn on/ off the monitor.

2. Auto adjusting

Press this button to obtain the best display

quality and adjust the image position.

3. Adjust (decrease －)

This button is used to decrease the value of

selected control option.

4. Adjust (increase ＋)

This button is used to increase the value of

selected control option.

5. OSD menu / select

Press this button to show the OSD menu on

the screen.

Select the OSD control options.

Page 5