Lenovo L171p 用户手册
2-6
ThinkVision L171p Flat Panel Monitor User’s Guide
Selecting a supported display mode
The display mode the monitor uses is controlled by the computer. Therefore, refer to
your computer documentation for details on how to change display modes.
your computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes.
This is normal and the image can be readjusted using automatic image setup and the
image controls.
This is normal and the image can be readjusted using automatic image setup and the
image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or
Flat Panel technology is inherently flicker-free.
Flat Panel technology is inherently flicker-free.
Note:
If your system has previously been used with a CRT monitor and is currently
configured to a display mode outside the range of this monitor, you may need to re-
attach the CRT monitor temporarily until you have re-configured the system;
preferably to 1280 x 1024 at 60 Hz, which is the Native Resolution Display mode.
attach the CRT monitor temporarily until you have re-configured the system;
preferably to 1280 x 1024 at 60 Hz, which is the Native Resolution Display mode.
The display modes shown below have been optimized at the factory.
Image rotation
Before rotating the monitor, you should set-up your computer to rotate the image.
Rotating the image may require special imaging software or you may find that your
computer is preloaded with video graphic drivers that enable image rotation. Check
the Graphic Properties setting on your computer to see if this feature is available.
Rotating the image may require special imaging software or you may find that your
computer is preloaded with video graphic drivers that enable image rotation. Check
the Graphic Properties setting on your computer to see if this feature is available.
Try these steps to check if image rotation is available on your computer.
1.
Right-click on the desktop and click Properties.
2.
Select the Settings tab and click Advanced.
3.
If you have ATI, select the Rotation tab and set the preferred rotation.
If you have nVidia, click the nVidia tab, in the left-hand column select NVRotate,
and then select the preferred rotation.
If you have Intel, select the Intel graphics tab, click Graphic Properties, select the
Rotation
If you have nVidia, click the nVidia tab, in the left-hand column select NVRotate,
and then select the preferred rotation.
If you have Intel, select the Intel graphics tab, click Graphic Properties, select the
Rotation
tab, and then set the preferred rotation.
Check with the manufacturer of your computer to see if graphic drivers with image
rotation can be downloaded from their support website.
rotation can be downloaded from their support website.
Table 2-3.
Factory set display modes
Addressability
Refresh rate
640 x 350
70 Hz
640 x 480
60 Hz, 67 Hz, 72 Hz, 75 Hz
720 x 400
70 Hz
800 x 600
60 Hz, 72 Hz, 75 Hz
1024 x 768
60 Hz, 70 Hz, 75 Hz
1280 x 1024
60 Hz, 70 Hz, 75 Hz