Lenovo T545 用户手册

Normally, you can complete the setup procedure using A

UTO

S

ETUP

, however,

if your screen image is still distorted after you perform A

UTO 

S

ETUP

or the

setup diskette does not run on your system, perform M

ANUAL 

S

ETUP

.

1.  Have your monitor turned on for about 15 minutes, until the monitor

warms up.

2. Display the image you most frequently use on the screen.

3.  Press the OSD Enter button

at the bottom of the monitor to display

the initial OSD menu.

4.  Use an Arrow button (     or     ) to select the IMAGE SET-UP icon        

and press the OSD Enter button

to access the function.

5.  Using an Arrow button (     or     ), select MANUAL, press

and then

press

once to select COARSE. Left and right arrow adjustment

indicators become illuminated (see page18).

6.  Use the Arrow buttons to manually adjust to correct (as much as

possible) for noise in the video signal then press

to save the

changes.

7.  Use an Arrow button to select FINE and press the

button.

8.  Use the Arrow buttons again to tune the image to your liking.

9.  When finished, press the Exit button

four times to exit from the

OSD.

You have completed the monitor setup.

Manual Setup