3M M2256PW 用户手册
3M™ Multi-touch Display M2256PW User Guide
35
3M Touch Systems, Inc. Proprietary Information – 37531 Rev D
The illustration below shows the coordinates of the calibration targets and display
corners. The corners show the video coordinates in parentheses and the touch screen
coordinates in brackets. Note that the touch screen coordinates for the serial interface
have their origin in the lower-left corner.
corners. The corners show the video coordinates in parentheses and the touch screen
coordinates in brackets. Note that the touch screen coordinates for the serial interface
have their origin in the lower-left corner.
Get Copyright
Syntax:
<SOH>Q101<CR>
Response:
<SOH>Copyright © 2010 3M. All rights reserved.<CR>
Description:
This command is used to get copyright information.
Mode Down Up
Syntax:
<SOH>MDU<CR>
Response:
<SOH>0<CR> Positive response.
Description:
Limits touch reports to touchdown and liftoff events only.
Mode Inactive
Syntax:
<SOH>MI<CR>
Response:
<SOH>0<CR> Positive response.
Description:
Turns off touch reports
.
Mode Stream
Syntax:
<SOH>MS<CR>
Response:
<SOH>0<CR> Positive response.
The controller will respond with acknowledge (ACK) for compatibility. This format is
the only format supported by this controller.
the only format supported by this controller.
(0, 1049) [0, 0]
(1679, 1049) [16383, 0]
Upper Right Calibration Target
X = 1679 – (1680 x 1/8) = 1679 – 210 = 1469
Y = 0 + (1050 x 1/8) = 0 + 131 = 131
Y = 0 + (1050 x 1/8) = 0 + 131 = 131
Lower Left Calibration Target
X = 0 + (1680 x 1/8) = 0 + 210 = 210
Y = 1049 - (1050 x 1/8) = 1049 - 131 = 918
(0, 0) [0, 16383]
(
1679, 0) [16383, 16383]
(210, 918)
(1469, 131)