Planar VS15XAD 用户手册

Operations Manual (OM705-00) 

When the monitor is on and no video signal is being received, the following 
message displays until the monitor enters power-saving mode:  

 

 

 

 

 

Check to ensure that the video cable is connected to the user system and the 
monitor. See “PROBLEM: No Image on Monitor” on page 18 for more 
information. 

1.  Make sure that the power indicator on the monitor is illuminated, all 

connections are secure, and the system is running on a supported video 
timing mode. 

2.  If the power LED is not illuminated, make sure the AC power connector is 

securely connected. If the AC adapter has an LED, verify that the LED is 
illuminated. If it is not, contact your dealer for assistance. 

3.  Turn the monitor off and then turn it back on.  

4.  If one is available, connect your system to another VitalScreen monitor. If 

the system functions properly with the alternate VitalScreen monitor but it 
does not function with the VS15XAD monitor, and the VS15XAD monitor’s 
power LED is blinking, the output timing of the computer’s video board may 
be out of the monitor’s synchronous range. Please change to an alternate 
mode (listed in “Technical Information” on page 17) or connect to an 
alternate video source and repeat steps 1 and 2. 

5.  Ensure that the computer’s video port is enabled. This is a function of the 

video board in the user computer system. See the video board documentation 
for instructions on how to enable the video port. 

6.  If the system does not function with either the alternate VitalScreen monitor 

or the VS15XAD monitor, contact technical support at your system provider.