Panasonic VL-GM201A 用户手册
10
Introduction and Installation
Before installation
To avoid a malfunction or communication disturbance, do not install the monitor station in the
following locations:
– Places where vibration or any other kind of impact occurs.
– Places where echoing is frequent.
– Places where a high concentration of dust, hydrogen sulfide, phosphorus, ammonia, sulfur,
following locations:
– Places where vibration or any other kind of impact occurs.
– Places where echoing is frequent.
– Places where a high concentration of dust, hydrogen sulfide, phosphorus, ammonia, sulfur,
carbon, acid, or noxious fumes occur.
– Within 2 m (6'7") of a TV, microwave, personal computer, air conditioner or any other
electrical device.
Standard installation position of the monitor station
Place the monitor station in a location so that your eyes are the same height as the center of
the display.
Place the monitor station in a location so that your eyes are the same height as the center of
the display.
Note:
L
In areas surrounded by high electrical field, disturbance may occur in the monitor station’s
image or sound.
image or sound.
L
Be sure to install the monitor station more than 5 m (16'5") away from the door station.
L
Do not place any objects within 20 cm (8 inches) of the monitor station. This may cause
communication errors or malfunction.
communication errors or malfunction.
L
Do not install the monitor station inside a wall.
GM201A.book Page 10 Monday, April 4, 2005 5:10 PM