TANDBERG D50104-15 用户手册
34
Health Care System III
Getting Started
LAN configuration
• Press M
ENU
on the remote control. Select the menu ‘Terminal Settings’, then ‘LAN Settings’.
Specify the necessary LAN settings according to the instructions from your LAN administrator. If there is an
H.323 Gatekeeper present on your LAN, see also ‘H.323 Settings’.
H.323 Gatekeeper present on your LAN, see also ‘H.323 Settings’.
For details, follow the instructions in chapter ‘LAN Settings’ in this manual.
ISDN configuration
For each installation of the system it is necessary to configure the unit. All configuration parameters are
available via the menu system. If you are using an external IMUX or special networks, the external
equipment may also need to be configured.
available via the menu system. If you are using an external IMUX or special networks, the external
equipment may also need to be configured.
• Press M
ENU
on the remote control. Select the menu ‘Terminal Settings’, then ‘Network’.
Set ‘Current Network’ to the network you want to use.
Specify the settings for the selected network in one of the menus.
For details, follow the instructions in chapter ‘Terminal Settings’, ‘Network Configuration’ in this manual.
For further information refer to the examples in:
Appendix 1: Connecting the system to ISDN using NT1 network adapters
Appendix 2: Connecting the system to the Switched 56 network
Appendix 2: Connecting the system to the Switched 56 network