TANDBERG D50104-15 用户手册
52
Health Care System III
General Use
PC SoftPresenter *
PC SoftPresenter is used to display PC images on your system. The system and your PC must be
connected to a LAN. In addition, VNC (Virtual Network Computing) server software must be installed on
the PC.
connected to a LAN. In addition, VNC (Virtual Network Computing) server software must be installed on
the PC.
To show the PC image:
•
•
Start the VNC software on your PC.
•
Press P
C
on your remote control. Use UP/DOWN to activate PAGE UP/PAGE DOWN on the PC.
For setup information and details, see ‘VNC Settings’ in ‘Advanced use’.
‘PC: VNC’
MUST
BE
SET
IN
‘V
IDEO
S
ETTINGS
’.
* - Optional feature.
NOTE
PC Presenter
Plugging a PC into the system is made extremely simple through the PC Presenter, avoiding the need for any
additional hardware such as a projector, PC/Video converter or extra cables.
additional hardware such as a projector, PC/Video converter or extra cables.
•
Start your PC.
•
Press P
C
on your remote control.
•
Press S
ELFVIEW
until the indicator ‘Selfview‘ is displayed on your main monitor (single monitor system)
or until you see the PC image on the second monitor.
If no PC image is displayed on your monitor, make sure that your PC transmits the image to the VGA
Output, and that the PC transmits a supported VGA-format (see tip below). Consult your PC-operating
manual to see how to transmit a VGA image from your PC (typically: Fn+F5).
Output, and that the PC transmits a supported VGA-format (see tip below). Consult your PC-operating
manual to see how to transmit a VGA image from your PC (typically: Fn+F5).
VGA-
FORMATS
SUPPORTED
(VESA
COMPLIANT
)
·640X480
60,72,75,85 H
Z
·800X600
56,60,72,75,85 H
Z
·1024X768
60,70,75 H
Z