TANDBERG D50104-15 用户手册

58

Health Care System III

Advanced Use

To send a still image immediately after pressing S

 select ‘Presentation Mode: Normal’.

To preview the image before it is transferred as a still image, select ‘Presentation Mode: Preview’. When
pressing S

 you will be allowed to view your still image, e.g. from the document camera, before sending

it as a still image by pressing S

 again. The far end will not see the still image while you are adjusting it.

Auto: Optimized video depending on selected video source and bandwidth in use**.

Motion: Duo Video is optimized for smooth motion video. This mode is ideal if the image from two

W.A.V.E. cameras should be simultanously transmitted to the far end.

Sharpness: Duo Video is optimized for sharp video, Digital Clarity. This mode is ideal when using a document

camera or a PC on Duo Video. If the far end does not support 4CIF live video, CIF will be selected.

* - Requires option ‘Presenter’ and H263 video. To check which options are installed, see the ‘System Info’ menu in ‘Diagnostics’.
** - 4CIF: PC and DocCam, otherwise CIF.
*** - Requires option ‘Presenter’. To check which options are installed, see the ‘System Info’ menu in ‘Diagnostics’.

Auto: Pressing any video source during a call will automatically open Duo Video (if the far end supports

the automatic Duo Video functionality).

Manual: Duo Video must be opened by pressing C

 during a call and selecting ‘Add Duo Video’. 

When adding Duo Video in a conference, Duo Video is connected automatically if supported by the far end.

Manual: When adding Duo Video in a conference and connected towards a system with no Duo Video capabilities,

enter the Duo Video Number into the ‘Number’ field in the ‘Add Duo Video’ menu. This can be the number
to another system (only video will be transmitted to the system receiving Duo Video).

Select which video source Duo Video transmits.

If you want the document camera to be the default source when using Duo Video / still images, select ‘Duo
Video / Still Image source: DocCam’.

To use the same video source as on the first connection for Duo Video / still images, select ‘Duo Video / Still
image source: Current’.