TANDBERG D50104-15 用户手册

72

Health Care System III

Advanced Use

Before using the system it is necessary to specify which network to use and define its settings.

If you want to use your system via ISDN-BRI you should select ‘Current Network: ISDN-BRI’ and enter
the ‘ISDN-BRI Settings’ menu to set the BRI parameters.

If you want to use your system via ISDN-PRI  you should select ‘Current Network: ISDN-PRI’ and enter
the ‘ISDN-PRI Settings’ menu to set the PRI parameters.

If you want to use special networks and connect using RS449, V.35, X.21 or connect to ISDN via an external
IMUX you should select ‘Current Network: External’ and enter the ‘External Network Settings’ menu to
set the External Network parameters.

If you want to use your system via ISDN-PRI, you should select ‘Current Network: ISDN-PRI’ and enter
the ‘ISDN-PRI Settings’ menu to set the PRI parameters.

If you want to use your system via Leased E1/T1, you should select ‘Current Network: Leased E1/T1’ and
enter the ‘Leased E1/T1 Settings’ menu to set the Leased E1/T1 parameters.

B

OTH

 ‘L

EASED

 E1/T1’ 

AND

 ‘ISDN-PRI’ 

USES

 

THE

 

SAME

 

PHYSICAL

 

INTERFACE

 

ON

 

THE

 

CODEC

 

MARKED

 ‘E1/T1’.

If you want to use special networks and connect using RS449, V.35, X.21 or connect to ISDN via an external
IMUX you should select ‘Current Network: External’ and enter the ‘External Network Settings’ menu to
set the External Network parameters.

This menu provides basic network setup for the unit and should be used when
installing the system.