TANDBERG D50104-15 用户手册
Health Care System III
87
Advanced Use
Network Profiles
This menu defines the settings listed when pressing the Quick key ‘Net:’ while in the dial menu.
This menu consists of 6 network profiles, a prefix can be added for each profile. If you add a prefix to a
profile, this prefix can be automatically added to the number being dialed.
profile, this prefix can be automatically added to the number being dialed.
E
XAMPLE
:
0
IS
ADDED
AS
A
C
ALL
P
REFIX
TO
THE
2
ND
PROFILE
, ISDN. I
F
YOU
ENTER
12345678
IN
THE
DIAL
MENU
AND
SELECT
‘ISDN’,
THE
NUMBER
DIALED
WILL
BE
012345678.
Using the three last profiles you can enter the name of a profile, prefix and network selection. This is useful
if you have a fixed prefix to your service provider.
if you have a fixed prefix to your service provider.
NOTE
Encryption*
Auto:
The system will try to make ISDN point-to-point calls using encryption. If the far end system
supports encryption, the call will be encrypted. If not, the call will proceed without encryption.
supports encryption, the call will be encrypted. If not, the call will proceed without encryption.
If the far end supports encryption, the systems will initiate encryption after the call is
connected. This takes approximately 10 seconds, during which an ‘open padlock’ will be displayed.
When encryption has been established, a ‘closed padlock’ symbol will be displayed.
connected. This takes approximately 10 seconds, during which an ‘open padlock’ will be displayed.
When encryption has been established, a ‘closed padlock’ symbol will be displayed.
Off :
The system will not send or receive encrypted data.
Technical encryption information like encryption algorithm and encryption check code can be found in the
‘Call Status’ menu.
‘Call Status’ menu.
Max Call Length
This feature will automatically end both incoming and outgoing calls when the call time exceeds the ‘Max
Call Length’ specified.
Call Length’ specified.
Max Call Length can have the following values: 0-999(minutes), where 0 is Off.
A few minutes before the specified time is reached, a Quick-Key menu will appear. Users will be asked if he/
she wants to extend the ‘Max Call Length’ that is specified:
she wants to extend the ‘Max Call Length’ that is specified: