Philips S1D13505 用户手册

Page 10

Vancouver Design Center

S1D13505

Windows® CE 2.x Display Drivers

X23A-E-001-06

Issue Date: 01/05/25

Once the NK.BIN file is built, the CEPC environment can be started by booting either from a 
floppy or hard drive configured with a Windows 9x operating system. The two methods are 
described below.

1. To start CEPC after booting from a floppy drive:

a.

Create a bootable floppy disk.

b. Edit CONFIG.SYS on the floppy disk to contain only the following line:

device=a:\himem.sys

c.

Edit AUTOEXEC.BAT on the floppy disk to contain the following lines:

mode com1:9600,n,8,1
loadcepc /B:9600 /C:1 c:\nk.bin

d. Copy LOADCEPC.EXE and HIMEM.SYS to the bootable floppy disk. Search for 

the loadCEPC utility in your Windows CE directories.

e.

Copy NK.BIN to c:\.

f.

Boot the system from the bootable floppy disk.

2. To start CEPC after booting from a hard drive:

a.

Copy LOADCEPC.EXE to C:\. Search for the loadCEPC utility in your Windows 
CE directories.

b. Edit CONFIG.SYS on the hard drive to contain only the following line:

device=c:\himem.sys

c.

Edit AUTOEXEC.BAT on the hard drive to contain the following lines:

mode com1:9600,n,8,1
loadcepc /B:9600 /C:1 c:\nk.bin

d. Copy NK.BIN and HIMEM.SYS to c:\.

e.

Boot the system.