Philips EM43 用户手册

下载
页码 8
 
Gates Underwater Products 
 
5111 Santa Fe Street, Suite H • San Diego, CA • 92109
 
858.272.2501 • 800.875.1052 • Fax 858.272.1208 • www.GatesHousings.com 
 
 
7   
 
 
Monitor Adjustment 
The EM43 has three adjustments for hue, contrast and brightness.  These adjustments 
can be found on the inside rear half of the housing (see photo). 
 
While the monitor is pre-adjusted at the factory, Gates recommends the monitor be 
further adjusted to match the camera being used.  This will ensure a consistent match 
between the monitor and the image actually being recorded.   
 
Matching the camera and monitor should be done in a darkened area to allow good 
viewing of both the monitor and the camera electronic viewfinder (EVF). 
 
With the camera on and the monitor plugged in, compare the image on the EVF to the 
monitor.  Using a small Philips screwdriver, make minor adjustment to the hue, contrast 
and brightness on the EM43 until you are satisfied that the image on the monitor 
accurately reflects that being seen in the EVF.   
 
NOTE: Hue adjustment is only applicable to NTSC SD input mode.  It is not used in PAL 
SD or HD input modes.  
 
 
 
Customer Support 
If you have any questions or require further assistance with your EM43 External Color 
Monitor, contact your dealer or Gates directly and we’ll be happy to assist.   
 
Email:   
Customer.Srvc@GatesHousings.com
   
Phone:  
858-272-2501 
Fax:  
858-272-1208 
 
Brightness 
Contrast 
Hue