Philips C221S3 用户手册

1. Important

1.2 Safety precautions and

maintenance

Warnings

• We strongly recommended that you should

shut down the system before you start to

clean any single components.

• No modification of this equipment is

allowed.

• Use of controls, adjustments or procedures

other than those specified in this

documentation may result in exposure to

shock, electrical hazards and/or mechanical

hazards.

• Read and follow these instructions when

connecting and using your computer

monitor.

Operation
• Please keep the monitor out of direct

sunlight, very strong bright lights and away

from any other heat source. Lengthy

exposure to this type of environment may

result in discoloration and damage to the

monitor.

• Remove any object that could fall into

ventilation holes or prevent proper cooling

of the monitor’s electronics.

• Do not block the ventilation holes on the

cabinet.

• When positioning the monitor, make

sure the power plug and outlet are easily

accessible.

• If turning off the monitor by detaching the

power cable or DC power cord, wait for 6

seconds before attaching the power cable

or DC power cord for normal operation.

• Please use approved power cord provided

by Philips all the time. If your power cord

is missing, please contact with your local

service center. (Please refer to Customer

Care Consumer Information Center)

• Do not subject the monitor to severe

vibration or high impact conditions during

operation.

• Do not knock or drop the monitor during

operation or transportation.

Maintenance
• To protect your monitor from possible

damage, do not put excessive pressure

on the monitor panel. When moving your

monitor, grasp the frame to lift; do not lift

the monitor by placing your hand or fingers

on the monitor panel.

• Unplug the monitor if you are not going to

use it for an extensive period of time.

• Unplug the monitor if you need to clean it

with a slightly damp cloth. The screen may

be wiped with a dry cloth when the power

is off. However, never use organic solvent,

such as, alcohol, or ammonia-based liquids

to clean your monitor.

• To avoid the risk of shock or permanent

damage to the set, do not expose the

monitor to dust, rain, water, or excessive

moisture environment.

• If your monitor gets wet, wipe it with dry

cloth as soon as possible.

• If foreign substance or water gets in

your monitor, please turn the power off

immediately and disconnect the power

cord. Then, remove the foreign substance

or water, and send it to the maintenance

center.

• Do not store or use the monitor in

locations exposed to heat, direct sunlight or

extreme cold.

• In order to maintain the best performance

of your monitor and use it for a longer

lifetime, please use the monitor in a

location that falls within the following

temperature and humidity ranges.
•  Temperature: 10°C to 40°C
•  Humidity: 30% to 75%
•  Atmospheric pressure: 700 to 1060 hPa