Samson Resolv 50a 用户手册

11

ENGLISH

10 Inch Long Throw Transducer 120 Watt Amplifier 

+4 INPUT

-10 INPUT

DESIGNED AND ENGINEERED IN THE UNITED STAT

THE UNITED ST

THE UNITED ST ES BY SAMSON 

www.samsontech.com

S/N

RESOLV MONIT

RESOL

RESOL

ORS CAN A

EXTREMELY HIGH SOUND 

EXTREMEL

EXTREMEL
PRESSURE LEVELS. USE CA

PRESSURE LEVELS.

PRESSURE LEVELS.
OR HEARING DAMA

S/N

GE MA

FROM MIXER

R

L

Adding a subwoofer (and extended low frequency response) to your RESOLV 50a system is easy using the RESOLV 50a’s 
LINE LEVEL inputs.  Below is a typical system set-up using the RESOLV 120a with a mixer and a pair of RESOLV 50a satellite 
speakers. For a detailed wiring diagram, see the section “RESOLV 50a Connections” on page 12.  Follow the steps in the 
diagram below to set up your system:

• 

 Lower your mixer’s master outputs to all the way off. 

  
• 

 Connect the mixer’s Left output to the RESOLV 120’s LEFT PREAMP LEVEL INPUT and the mixer’s Right output to 
the RESOLV 120’s RIGHT PREAMP LEVEL INPUT.  Now connect the RESOLV 120’s LEFT PREAMP LEVEL OUTPUT to 
the input of the left RESOLV 50a, and the RESOLV 120’s RIGHT PREAMP LEVEL OUTPUT to the input of the right 
RESOLV 50a.

•  

Run an audio signal (like some music from a CD) through your mixer and raise the level to a comfortable  

 

listening level.

• 

 Now adjust the SWEEP control to the desired frequency.   A good place to start is about 70 Hz. You can also use 
your ears by adjusting the SWEEP control to the frequency that sounds good to you.