Roland DM-5 用户手册

 

Function and Connection

 

This switch selects the stereo position of the digital signal.
It selects Right, L+R, or Left when using two DM-5 monitors 
for stereo sound (with digital signals).
Choose the setting appropriate for your setup.

 

This switch turns the power on/off.

 

Connect the included Power cord here. Plug it firmly in, so 
that the cable does not accidentally become disconnected.

 

This box contains continental and British power cables. 
Please select the correct type for your country.

 

Used to select Digital Input or Analog Input.
Select the connector used for the input signal.

 

This is for connecting XLR or 
TRS phone plugs.
Both balanced and unbalanced 
connections are possible.

 

When connecting multiple DM-5 monitors with digital 
signals, this connector is used for output to the second DM-5.

1: GND
2: HOT
3: COLD

GND (SLEEVE)

HOT (TIP)

COLD (RING)

 

●

 

• To prevent malfunction and/or damage to speakers or 

other devices, always turn down the volume, and turn off 
the power on all devices before making any connections.

• Once the connections have been completed, turn on 

power to your various devices in the order specified. By 
turning on devices in the wrong order, you risk causing 
malfunction and/or damage to speakers and other 
devices.

(When turning the power off, reverse this procedure.)

 

→

 

• This unit is equipped with a protection circuit. A brief 

interval (a few seconds) after power up is required before 
the unit will operate normally.

DV-7

CD Player, MD Player, etc.

DIGITAL OUT

DIGITAL IN
(COAXIAL)
(OPTICAL)

THRU

(DIGITAL OUT)

DIGITAL IN
(COAXIAL)

Select