Matrox Electronic Systems PCI G450 用户手册
Matrox Graphics Card – User Guide
23
Software setup
If a TV or video recorder is connected to your Matrox product, you can use TV output mode to view
or record your display on your TV or video recorder. (To connect video devices to your computer,
or record your display on your TV or video recorder. (To connect video devices to your computer,
TV settings have lower resolutions and refresh rates than typical computer monitor settings. Lower
refresh rates may result in more noticeable flicker.
refresh rates may result in more noticeable flicker.
Windows 98/Me/2000/XP – To add a TV to your Windows desktop,
Windows 98/Me/2000/XP or NT 4.0 – To use TV output, you can use the DualHead Clone,
DualHead Zoom, or DualHead DVDMax
DualHead Zoom, or DualHead DVDMax
*
features (
Windows 98/Me/2000/XP – To adjust TV settings, access the Matrox PowerDesk
DualHead
property sheet (
).
Windows NT 4.0 – To adjust TV settings, access the Matrox PowerDesk
Monitor
property
). To adjust advanced TV settings,
click
Advanced TV Settings
.
For more information on how you can use your secondary display, see Matrox PowerDesk
online help.
online help.
Note:
Two TV standards are supported for TV output. The NTSC standard is used in North
America and Japan, among other places. The PAL standard is used in most of Western Europe
and in China, among other places.
and in China, among other places.
If an incorrect TV standard is selected in Matrox software, the output from your computer
may not appear or record properly on your TV or your video recorder. To find out what
standard your TV or video recorder supports, see its documentation.
may not appear or record properly on your TV or your video recorder. To find out what
standard your TV or video recorder supports, see its documentation.
* (1) Under Windows NT 4.0, the DualHead DVDMax feature isn’t supported. (2) If you have a PCI G450-based graphics card, this
feature may not be supported with computers that don’t have Intel chipsets.