Network Technologies CM-RK17 用户手册

 

 

 

 
Mount the CRYSTALMON as intended for the application.     
 

 
 
Secure the CRYSTALMON (model CM-RK17) to a rack using appropriate hardware through the holes provided (see 
Fig. 1).    Mount using at least two screws on each side.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 

 
Mount the selected Wall Mount LCD Arm or bracket assembly to the wall.   Attach the VESA mounting bracket from 
the selected Wall Mount LCD Arm to the four holes located in the back of the CRYSTALMON using the M4 x 10mm 
screws (4) provided.   A set of holes is provided for either the 100mm bracket, or the 75mm bracket,  whichever is 
needed (see Fig. 2).   (The 75-100mm mounting adaptor that is sometimes provided will not be necessary.) Follow 
the instructions that came with the mounting arm or bracket to complete the assembly.