Network Technologies CM-RK17 用户手册

 

 
 

The CRYSTALMON 17” monitor supports resolutions up to SXGA (1280x1024) with a refresh rate at between 55 and 
76Hz.    The quality of the image on the LCD monitor is adjustable using an On Screen Display (OSD) menu using 
the control buttons on the CRYSTALMON.     

 

•  The CRYSTALMON has 5 standard control buttons and a power LED.   The 5 standard control buttons operate 

as follows: 

 

• The 

Power button turns the CRYSTALMON LCD and backlight ON and OFF as desired.    

 

• The 

Power LED located immediately below the Power button is 

       a dual color LED.     It will illuminate with a green color when the  
       CRYSTALMON is powered ON and working properly.     It will  
       illuminate with a red color if the CRYSTALMON is powered ON  
       but there is no input signal detected.    The LED will illuminate  
       red only momentarily just before turning OFF.   

 

• The 

Menu button is used to bring up the OSD menu where the 

various settings of the LCD display can be adjusted. 

      Once the OSD screen is displayed, the Menu button is used  
      to make selections within the menus.    See "OSD Control Menu"  
      on page 11 for more on LCD display settings. 

 

• The 

Up and Down Arrow buttons are used to navigate through the 

menus.   Move the cursor up or down as desired to highlight  

      an item for selection.   Once an item is highlighted, pressing the 
      Menu button will select it.    

 

 

 
• The 

Select button is used to make selections within the OSD menus when  the OSD menu is ON.  When the 

OSD menu is OFF,  the Select button will act as an Auto Adjust button to keep the user from having to use the 
menus to adjust the quality of the image on the monitor.