Samsung Q1 用户手册
Important Safety Information 144
Important Safety Information
Battery Disposal
Do not put rechargeable batteries or products powered by non-removable rechargeable batteries
in the garbage.
in the garbage.
Contact the Samsung Helpline for information on how to dispose of batteries that you cannot use or
recharge any longer. Follow all local regulations when disposing of old batteries.
recharge any longer. Follow all local regulations when disposing of old batteries.
Laser Safety
All systems equipped with CD or DVD drives comply with the appropriate safety standards, including
IEC 825. The laser devices in these components are classified as “Class 1 Laser Products” under a
US Department of Health and Human Services (DHHS) Radiation Performance Standard. Should the
unit ever need servicing, contact an authorized service location.
IEC 825. The laser devices in these components are classified as “Class 1 Laser Products” under a
US Department of Health and Human Services (DHHS) Radiation Performance Standard. Should the
unit ever need servicing, contact an authorized service location.
Laser Safety Note
Use of controls or adjustments or performance of procedures other than those specified in this
manual may result in hazardous radiation exposure. To prevent exposure to laser beams, do not
try to open the enclosure of a CD or DVD drive.
Use of controls or adjustments or performance of procedures other than those specified in this
manual may result in hazardous radiation exposure. To prevent exposure to laser beams, do not
try to open the enclosure of a CD or DVD drive.
Power Cord Requirements
The power cord set (wall plug, cable and AC adapter plug) you received with your computer meets
the requirements for use in the country where you purchased your equipment.
Power cord sets for use in other countries must meet the requirements of the country where you
use the computer. For more information on power cord set requirements, contact your authorized
dealer, reseller, or service provider.
the requirements for use in the country where you purchased your equipment.
Power cord sets for use in other countries must meet the requirements of the country where you
use the computer. For more information on power cord set requirements, contact your authorized
dealer, reseller, or service provider.
General Requirements
The requirements listed below are applicable to all countries:
•
The length of the power cord set must be at least 6.00 feet (1.8m) and a maximum of 9.75 feet
(3.0m).
(3.0m).
•
All power cord sets must be approved by an acceptable accredited agency responsible for
evaluation in the country where the power cord set will be used.
evaluation in the country where the power cord set will be used.
•
The power cord set must have a minimum current capacity of 7 A and a nominal voltage rating
of 125 or 250 volts AC, as required by each country’s power system.
of 125 or 250 volts AC, as required by each country’s power system.
•
The appliance coupler must meet the mechanical configuration of an EN 60 320/IEC 320
Standard Sheet C7 connector, for mating with appliance inlet on the computer.
Standard Sheet C7 connector, for mating with appliance inlet on the computer.